No products in the cart.
Fire Safety
Notifier FSP-951T-White, low-profile intelligent photoelectric sensor
Availability:
Available on backorder
SPECIFICATION:
| Weight | 0.20 lbs |
|---|---|
| Construction | Plastic |
| Programming | Rotary Dials |
| Material Qualities | Fire Resistant |
| Detection Method | Fixed Temperature, Photoelectric |
| Thermal Rating | 135°F |
| System Type | |
| Series | Notifier FSP-951 Series: Addressable Photoelectric Smoke Detectors |
| Condition | New |
| Compatibility Guide | N16e, N16x, NFS-320, NFS2-3030, NFS2-640, NFW-100X, NFW-50X |
FEATURES:
- Sleek, low-profile design
- Available in both Bright White (for new installations) and Ivory (for legacy installations)
- Photoelectric smoke detection
- Analog communications
- Low standby current
- Rotary address switches
- Dual LEDs for 360° visibility
MOQ :2 PCs
Delivery (UAE & Oman): 1 to 2 weeks subject to prior sales
AED170.00
Available on backorder
DESCRIPTION:
The NOTIFIER® FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics, and are direct replacements for the FSP-851 Series. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards.
The FSP-951 Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the FSP-951T. The FSP-951R is a remote test capable detector for use with DNR Series duct detector housings. FSP-951 series detectors are available for both FlashScan® and CLIP applications as designated.
MOQ :2 PCs
Delivery (UAE & Oman): 1 to 2 weeks subject to prior sales
Related products
- Fire Safety
Notifier FST-951R -White, low-profile intelligent rate-of-rise thermal sensor, FlashScan only
Fire SafetyNotifier FST-951R -White, low-profile intelligent rate-of-rise thermal sensor, FlashScan only
SPECIFICATION:
Weight .50 lbs Programming Rotary Dials Series Notifier FST-951 Series: Intelligent Addressable Heat Detectors System Type Condition New Detection Method Rate-of-Rise Compatibility Guide N16e, N16x, NFS-320, NFS2-3030, NFS2-640, NFW-100X, NFW-50X FEATURES:
- Sleek, low-profile design
- Thermal smoke detection
- Analog communications
- Low standby current
- Rotary address switches
- Dual LEDs for 360° visibility
MOQ :20 PCs
Delivery (UAE & Oman): 1 to 2 weeks subject to prior sales
SKU: FST-951R - Fire Safety
Notifier FZM-1-Monitor module, two-wire detectors
SPECIFICATION:
Weight 1.00 lbs Programming Rotary Dials Condition New FEATURES:
- Supports compatible two-wire smoke detectors.
- Supervises IDC wiring and connection of external power source.
- High noise (EMF/RFI) immunity.
- SEMS screws with clamping plates for ease of wiring.
- Direct-dial entry entry of address: 01 – 159 on FlashScan loops, 01 – 99 on CLIP loops.
- LED flashes during normal operation; this is a programmable option.
- LED latches steady to indicate alarm on command from control panel.
MOQ :20 PCs
Delivery (UAE & Oman): 1 to 2 weeks subject to prior sales
SKU: FZM-1 - Fire Safety
Notifier FCM-1-Intelligent Addressable Control Module
SPECIFICATION:
Weight 1.00 lbs Dimensions 4.50 × 4.00 × 1.25 in Manufacturer Honeywell Brand Notifier Condition New Type Intelligent Module Style Control Connections Screw Terminals Mounting 4″ Square, SMB500 Programming Rotary Dials Protocol CLIP, FlashScan Status Indicator LED Voltage 24 VDC Voltage Range 15 – 32 VDC FEATURES:
- Built-in type identification automatically identifies these devices to the control panel.
- Internal circuitry and relay powered directly by two-wire SLC loop. The FCM-1(A) module requires power (for horns, strobes, etc.), or audio (for speakers).
- Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated.
- LED blink may be deselected globally (affects all devices).
- High noise immunity (EMF/RFI).
- The FCM-1(A) may be used to switch 24-volt NAC power, audio (up to 70.7 Vrms).
- Wide viewing angle of LED.
- SEMS screws with clamping plates for wiring ease.
- Direct-dial entry of address 01– 159 for FlashScan loops, 01 – 99 for CLIP mode loops.
- Speaker, and audible/visual applications may be wired for Class B or A (Style Y or Z).
MOQ :20 PCs
Delivery (UAE & Oman): 1 to 2 weeks subject to prior sales
SKU: Notifier FCM-1 - Fire Safety
Notifier SBB-A4-Backbox assembly, one tier, BLACK
SPECIFICATION:
Weight 15 lbs Color Black Construction Steel Series Notifier CAB-4 Series Cabinets: ONYX Series Backboxes with Locking Doors, Onyx Series Condition New FEATURES:
- The key-locked door is provided with a pin-type hinge, two keys and the necessary hardware to mount the door to the backbox.
- The backbox has been engineered to provide ease-of-entry for the installer. Knockouts are positioned at numerous points to aid the installer in bringing a conduit into the enclosure with a minimum of hardship.
- Right- or left-hand hinges, selectable in the field. Door opens 180°.
- Cabinets are arranged in four standard sizes, A (one tier) through D (four tiers), plus a mini cabinet (AA, one tier with- out a battery compartment). See Ordering Information.
- A trim ring option is available for semi-flush mounting.
- Chassis bridge available for assembling multiple CHS-4 chassis external to the backbox.
MOQ :5 PCs
Delivery (UAE & Oman): 1 to 2 weeks subject to prior sales
SKU: SBB-A4
