HONEYWELL PRESSURE TRANSMITTER-STG73S; LCD DISPLAY ,RANGE :-14.7 TO 50 PSI ;OUTPUT :4-20 mA ,HART PROTOCOL

Part No:STG73S-E1G000-1-C-AHS-13S-B-01A0-FG,FX,F1,FE,TP-0000

STG73S:Mesurement Range-URL/max Span: 50 (3.5))
LRL: -14.7 (-1.0)
Min span: 0.5 (.035)
Units:PSI(Bar)
E:ProcessWetted Heads Material-316 Stainless Steel
Barrier Diaphragm Materials-316L Stainless Steel
1:Fill Fluid-Silicone Oil 200
G: Process Connection- Size /Type: 1/2″ NPT (female),Material: Same as Process Head
0:: Bolt/Nut Materials – none
0: Vent/Drain Type/Location: Head Type- none
Vent Type-None
Location: None
Vent Material:None
0: Gasket Material – Graphite
1: Head/Connect Orientation:Standard, High Side Left, Ref Side Right2 / Std Head Orientation
C:Approvals: ATEX Explosion proof, Intrinsically Safe & Non-incendive
A:Transmitter Electronic Housing Material – Polyester Powder Coated Aluminum
Connection: ½ NPT;Lightening protection:None
H . Output/ Protocol Analog Output: 4-20mA dc:Digital Protocol : HART Protocol
S: Customer Interface Selections-:Indicator- Standard (w/Internal Zero,Span & Config Buttons; ); Ext Zero, Span & Config Buttons-none ;Languages- EN, RU
1: Application Software: Standard Diagnostics
3: Output Limit, Failsafe & Write Protect Setting : Write Protect – Enabled;
Fail Mode: High> 21.0mAdc;High and Low output Limits: Honeywell Std (3.8 – 20.8 mAdc)
S: General Configuration: Factory Standard
B: Accuracy- Standard; Calibrated Range: Custom (Unit Data Required);Calibration Qty: Single Calibration
0: Mounting Bracket-Bracket Type:none;Material: none
1:Customer Tag: One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
A0: No Conduit Plugs or Adapters Required
FG: NACE MR0175; MR0103; ISO15156 Process wetted parts only
FX: EN10204 Type 3.1 Material Traceability (FC33341)
F1: Calibration Test Report & Certificate of Conformance (F3399)
FE: FMEDA (SIL 2/3) Certification (FC33337)
TP: Over-Pressure Leak Test Certificate (1.5X MAWP) (F3392)
0000: Manufacturing Specials- Factory Identification

Note: If there is any change in parameters/specification or required any customization or higher quantities, kindly send us your inquiry to CC@instrume.net.

Delivery (UAE & Oman) :2-3 weeks subject to prior sales