HONEYWELL PRESSURE TRANSMITTER- STG74S; LCD DISPLAY ,RANGE :-14.7 TO 500 PSI ;OUTPUT :4-20 mA ,HART PROTOCOL

Availability:

2 in stock


Part No: STG74S-E1H000-1-C-DHS-13S-B-31A0-FG,FX,F1,FE,TP-0000

STG74S: Gauge In-Line
Measurement Range-URL/max Span: 500 (35)
LRL: -14.7 (-1.0)
Min span: 5 (.35)
Units: PSI(Bar)
E:ProcessWetted Heads Material-316 Stainless Steel
Barrier Diaphragm Materials- 316L SS
1: Fill Fluid-Silicone Oil 200
H: Process Connection- Size /Type: 1/2″ NPT (male) ,Material: Same as Process Head
0:: Bolt/Nut Materials – none
0: Vent/Drain Type/Location: Head Type- none
Vent Type-None
Location: None
Vent Material: None
0: Gasket Material – Graphite
1: Head/Connect Orientation: Standard, High Side Left, Ref Side Right2 / Std Head Orientation
C: Approvals: ATEX Explosion proof, Intrinsically Safe & Non-incendive
D: Transmitter Electronic Housing Material – Polyester Powder Coated Aluminum
Connection: M20;Lightening protection: Yes
H . Output/ Protocol Analog Output: 4-20mA dc: Digital Protocol : HART Protocol
S: Customer Interface Selections-:Standard(w/Internal Zero, Span& Config buttons)
Ext Zero, Span & Config Buttons-None ; Languages- EN, RU
1: Application Software: Standard Diagnostics
3: Output Limit, Failsafe & Write Protect Setting: Write Protect – Enabled;
Fail Mode: High> 21.0mAdc;High and Low output Limits: Honeywell Std (3.8 – 20.8 mAdc)
S: General Configuration: Factory Standard
B: Accuracy- Standard; Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration
3: Mounting Bracket-Bracket Type: Angle type;Material: 316SS
1:Customer Tag: One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
A0: No Conduit Plugs or Adapters Required
FG: NACE MR0175; MR0103; ISO15156 Process wetted parts only
FX: EN10204 Type 3.1 Material Traceability (FC33341)
F1: Calibration Test Report & Certificate of Conformance (F3399)
FE: FMEDA (SIL 2/3) Certification (FC33337)
TP: Over-Pressure Leak Test Certificate (1.5X MAWP) (F3392)
0000: Manufacturing Specials- Factory Identification

Note: If there is any change in parameters/specification or required any customization or higher quantities, kindly send us your inquiry to CC@instrume.net.

Delivery (UAE & Oman) :2-3 weeks subject to prior sales

AED2,096.00

2 in stock

HONEYWELL PRESSURE TRANSMITTER- STG74S; LCD DISPLAY ,RANGE :-14.7 TO 500 PSI ;OUTPUT :4-20 mA ,HART PROTOCOL

Check otherHoneywell pressure transmitter

Manufacturerwebsite

SKU: STG74S-E1H000-1-C-DHS-13S-B-31A0-FG,FX,F1,FE,TP-0000 Category:

DATASHEET

STG 74S-77S-78S-79S

If specification not listed or need customization, send Email at cc@instrume.net for Formal Proposal