HONEYWELL PRESSURE TRANSMITTER- STG74S; LCD DISPLAY ,RANGE :-14.7 TO 500 PSI ;OUTPUT :4-20 mA ,HART PROTOCOL

Part No:STG74S-J1G000-1-C-BHT-13S-A-30A0-FG,FX,F1,FE,TP-0000

STG74S: Gauge In-Line
Measurement Range-URL/max Span: 500 (35)
LRL: -14.7 (-1.0)
Min span: 5 (.35)
Units: PSI(Bar)
J:ProcessWetted Heads Material- Hastelloy C – 276/316 Stainless Steel
Barrier Diaphragm Materials Hastelloy C – 276
1:Fill Fluid-Silicone Oil 200
G: Process Connection- Size /Type: 1/2″ NPT (female) ,Material: Same as Process Head
0:: Bolt/Nut Materials – none
0: Vent/Drain Type/Location: Head Type- none
Vent Type-None
Location: None
Vent Material: None
0: Gasket Material – Graphite
1: Head/Connect Orientation: Standard, High Side Left, Ref Side Right2 / Std Head Orientation
C: Approvals: ATEX Explosion proof, Intrinsically Safe & Non-incendive
B: Transmitter Electronic Housing Material – Polyester Powder Coated Aluminum
Connection: M20;Lightening protection:None
H . Output/ Protocol Analog Output: 4-20mA dc:Digital Protocol : HART Protocol
T: Customer Interface Selections-:Standard(w/Internal Zero, Span& Config buttons)
Ext Zero, Span & Config Buttons-Yes ;Languages- EN, RU
1: Application Software: Standard Diagnostics
3: Output Limit, Failsafe & Write Protect Setting: Write Protect – Enabled;
Fail Mode: High> 21.0mAdc;High and Low output Limits: Honeywell Std (3.8 – 20.8 mAdc)
S: General Configuration: Factory Standard
A: Accuracy- Standard; Calibrated Range: Factory Standard
Calibration Qty: Single Calibration
3: Mounting Bracket-Bracket Type: Angle type; Material: 316SS
0:Customer Tag: No customer Tag
A0: No Conduit Plugs or Adapters Required
FG: NACE MR0175; MR0103; ISO15156 Process wetted parts only
FX: EN10204 Type 3.1 Material Traceability (FC33341)
F1: Calibration Test Report & Certificate of Conformance (F3399)
FE: FMEDA (SIL 2/3) Certification (FC33337)
TP: Over-Pressure Leak Test Certificate (1.5X MAWP) (F3392)
0000: Manufacturing Specials- Factory Identification

Note: If there is any change in parameters/specification or required any customization or higher quantities, kindly send us your inquiry to CC@instrume.net.

Delivery (UAE & Oman) :2-3 weeks subject to prior sales